GAMMA
instabus
Technical product information
February 2012
UP 258D11 OPTISENS OFFICE Presence detector / motion detector with lighting control
5WG1 258 2DB11
Technical manual
UP 258D11, 8 pages
Siemens AG
Infrastructure & Cities Sector, Building Technologies
Update: http://www.siemens.com/gamma
© Siemens AG 2012
Control Products and Systems
Subject to change without further notice
P.O. Box 10 09 53, D 93009 Regensburg
2.13.1.6/4
A1
A2
A3
A4 A5
A6
A7
A8
A10
A11
A9
•
Fire load: approx. 2480 kJ
•
Installation: in flush mounting box, ceiling opening, or
in surface mounting box (see accessories)
Electrical safety
•
Degree of pollution (according to IEC 60664 1): 2
•
Type of protection (according to EN 60529): IP 20
•
Overvoltage category (according to IEC 60664 1): III
•
Bus: safety extra low voltage SELV DC 24 V
•
Device complies with: EN 60669 2 1
EMC requirements
•
Complies with EN 50428
Environmental conditions
•
Climatic withstand capability: EN 50090 2 2
•
Ambient operating temperature: 5 ... + 45
°
C
•
Storage temperature: 20 ... + 70
°
C
•
Relative humidity (not condensing): 5 % to 93 %
Reliability
•
Failure rate: 410 fit at 40
°
C
Markings
•
KNX
EIB
CE mark
•
In accordance with the EMC guideline (residential and
functional buildings), low voltage guideline
Accessories
IR remote control
5WG1 255 – 7AB11
AP housing
5WG1 258 – 7EB01
Location and function of the display and
operating elements
Figure 2: Display and operating elements
A1 UP 258D device
A2 Fixing clamps
A3 adjustable sensor head
A4 PIR sensor
A5 Brightness sensor
A6 IR receiver for remote controls
A7 LED (red) and programming key
A8 Shade
A9 Design cover
A10 Bus terminal
A11 Barcode label with KNX serial number and supplier
code
