Siemens TP5 Series, Руководство пользователя

Страница: 30 / 252

en Cleaning and servicing
30
Using calc'nClean
You can combine the cleaning and de-
scaling programmes using the
calc'nClean service programme. Run
the calc'nClean programme when your
appliance prompts you. The process
takes approx. 43 minutes.
Requirement:
The brewing unit is
cleaned.
→ "Cleaning brewing unit", Page 27
1.
Press ⁠.
2.
Use and to select "Cleaning
and care" and press ⁠.
3.
Use and to select
"calc'nClean" and press ⁠.
4.
To start the programme, press ⁠.
a
The display will guide you through
the programme.
5.
Empty and insert the drip tray.
6.
If there is a water filter, remove it.
7.
Press ⁠.
8.
Empty the water tank.
9.
Fill a container with 0.5 l lukewarm
water.
10.
Add a Siemens descaling tablet to
the water and stir until the tablet is
fully dissolved.
11.
Pour the descaling solution into the
water tank up to the calc mark and
press ⁠.
12.
Place a container with a capacity of
min. 0.5 l under the outlet system.
13.
Place the end of the suction pipe in
the container and press ⁠.
a
The descaling programme will run
for approx. 20 minutes.
14.
Rinse the water tank.
15.
Press ⁠.
16.
If there is a water filter, insert the wa-
ter filter.
→ "Insert water filter", Page 21
17.
Press ⁠.
18.
Fill the tank with fresh water up to
the "max" mark.
19.
Press ⁠.
a
The programme takes ap-
prox. 1 minute and rinses the appli-
ance.
20.
Empty and insert the drip tray.
21.
Open the ground coffee compart-
ment.
22.
Place one Siemens cleaning tablet
into the ground coffee compartment.
23.
Close the ground coffee compart-
ment and press ⁠.
24.
Place a container with a capacity of
min. 0.5 l under the outlet system
and press ⁠.
a
The cleaning programme takes ap-
prox. 7 minutes.
25.
Empty and insert the drip tray.
26.
Thoroughly clean the suction pipe of
the milk system.
a
The program has ended and the ap-
pliance is ready for operation.