Siemens TK 911N2, Руководство по эксплуатации

Страница: 29 / 108

25
Fault codes
    
Danger of electric shock!
Set the ON/OFF switch 17 to 0 , as soon as one of the
fault codes F1 through F10 lights up.
F1, F2, F6, F7, F9
Electrical malfunction
Set the ON/OFF switch 17 to 0 , and after about 15
seconds reset to I once again.
F3, F4, F5, F8
Mechanical malfunction
Set ON/OFF switch 17 to 0 and proceed as follows:
A capsule may have become jammed in the vicinity of
the brewing unit.
Remove and empty the capsule container 13 .
● Pull the coffee dispenser 14 and the capsule holder
15 forwards out of their seating (Fig. 8). It should be
possible to see the capsule, which may be carefully
pushed backwards, using a spoon. Once the capsule
has been removed, restart the appliance.
● If the fault code is still lit, set the ON/OFF switch 17 to
0, and then back to I again after about 5 seconds (it
may be necessary to repeat this procedure).
F10 Capsule holder 15 missing or misaligned.
Check the capsule holder 15 , and mount correctly.
If the fault message lights up again after the appliance is put back into operation,
the hotline must be contacted.
en