Siemens TI 903 Series, Инструкция по эксплуатации, Страница: 22 / 180

en
Menu settings
22
--------
Starting the "Water filter"or
"frost protection" programme
1.
Briefly press the
$
/
±
button.
2.
The rotary selector can be used to
select the "Water filter" or "frost
protection" programme. The current
setting is marked on the display.
Note:
The rotary selector can also be
used to select a service programme.
~
"Service programmes" on page 26
Water filter
A water filter lessens limescale
deposits, reduces impurities in water
and improves the taste of the coffee.
Water filters are available from retailers
or from customer service.
~
"Accessories" on page 11
Inserting or replacing a water filter
A new water filter must be rinsed before
it can be used.
1.
Select "Water filter" in the menu
settings.
2.
Use the navigation button to select
"insert" or "replace".
3.
Use the measuring spoon to press
the water filter firmly into the empty
water tank.
4.
Fill the water tank with water up to
the "
max
" marking.
5.
Place a container with a capacity of
at least 1.0 l under the outlet and
confirm.
Water will now flow through the filter.
The filter is rinsed.
6.
Subsequently empty the container.
The appliance is ready for use again.
Demo mode
■
on
■
off
For presentation purposes only. The setting "off"
must be activated for normal operation. The set-
ting is only possible in the first 3 minutes after
switching on the appliance.
Beverage settings
Espresso / Cof-
feetemperature
■
normal
■
high
■
max.
Setting the temperature for coffee drinks.
The setting is effective for all preparation types.
Hot water temper-
ature
■
> 70 °C
■
> 80 °C
■
> 85 °C
■
> 90 °C
■
> 97 °C
Setting the temperature for hot water.
The setting is effective for all preparation types.
Order coffee/milk
■
first milk
■
first coffee
Setting that governs whether milk or coffee
should be brewed and dispensed first. (Cappuc-
cino)