Softening SystemNL
Remark:Set the device to the
determined water hardness.
With a water hardness of 0 - 6 °dH
you do not need to use softening salt
for dishwashers and you can switch
off the water softening.
†Switching off water softening",
PAY ATTENTION!
†Dishwasher detergent can damage the water
damage hardening.
▶
Only fill the water softener
reservoir with dishwasher
softening salt.
†The rinse aid container can be
softening salt for dishwashers
corrode.
▶
To ensure that spilled softening
salt is rinsed from the rinse aid
container, the softening salt must
be filled into the softening salt
reservoir immediately before the
program starts.
Set water softening
Set the device to the water hardness.
1.
Determine the water hardness and the
desired setting value.
1.
Open the lid of the softening salt
reservoir and remove it.
2.
Press.
3.
Approx. Press for 3 seconds to
access the basic settings.
2.
When using for the first time: fill the
reservoir completely with water.
4.
Press repeatedly until the display
shows "Water hardness".
3. Note:Only use dishwasher
softening salt.
Do not use salt tablets. Do not
use table salt.
5.
Press or repeatedly until the desired
water hardness is set.
The factory setting is 13 - 16.
Place the softening salt in the
softening salt reservoir.
6.
To save the settings, press for
approx. 3 seconds.
Softening salt
You can soften the water with
softening salt.
Filling softening salt
If the Refill softener salt indicator
lights up, top up the softener salt in
the softener salt reservoir immediately
before the program starts. The
consumption of softening salt
depends on the water
higher the water
e higher it is
ngsalt.
Fill the water softening salt
reservoir completely with softening
salt. The water in the reservoir is
displaced and flows away.
degree of hardness. How
degree of hardness, des t
consumption of softener
4.
Fit and close the lid of the
reservoir.
29
Содержание SX67ZX02CE
Страница 67: ......