Siemens SR53HS28KE, Руководство пользователя

Страница: 13 / 64

Set up and connectNL
†Quick guide
2.
Connect the drain hose to the
connection nipple of the siphon
using the supplied parts.
Set up and connect the
device
3.
Make sure that the drain hose is not
kinked, crushed or tangled.
You can install your undercounter or
built-in appliance in the kitchen unit
between wooden and plastic walls. If
you subsequently install the appliance
as a free-standing appliance, you must
secure the appliance against tipping
over, e.g. by screwing it to the wall or
installing it under a continuous
worktop that is firmly connected to the
adjacent cupboards.
4.
Make sure that the water does not
flow out by a plug in the waste
water connection.
Drinking water connection
Connect the device to a drinking
water connection.
Install drinking water connection
1. "
Observe the safety instructions." →
Page 4
Remark
†When you replace the device,
you can use a new water supply
hose.
2. "
Observe the instructions for the
electrical connection."
→ Page 13
3.
Check the contents of the package
and the condition of the device.
1.
The necessary steps can be found in
the supplied installation instructions.
4.
The required installation dimensions can be found
in the installation instructions.
2.
Connect the device to the drinking
water connection using the
enclosed parts.
5.
Level the appliance using the
adjustable feet. The "technical data"
→ Page 59consider.
Pay attention to a firm position.
3.
Make sure that the drinking water
connection is not kinked, crushed
or entangled.
6. "
Install the waste water connection."
→
Page 13
7. "
Install the drinking water
connection." →
Page 13
Electrical connection
8.
Connect the device to the
power.
Connect the device to the mains.
Waste water connection
Connecting the appliance electrically
Connect the appliance to a waste water
connection so that the contaminated
washing water can be drained.
Comments
†Observe the "Safety
sing" →
Page 5†
†Only connect the device
on an AC voltage of 220 - 240 V
and 50 Hz or 60 Hz.
Install waste water connection
1.
The necessary steps can be found in
the supplied installation instructions.
13