Engineer Programming Via the Keypad
52
Siemens Building Technologies
Fire Safety & Security Products
09.2008
10.3.14 Show State
To enable or disable the show state feature:
1.
Scroll to the SHOW STATE programming
option.
2.
Press SELECT.
3.
Toggle between ENABLED and DISABLED for
preferred option.
4.
Press SAVE to update the setting.
10.3.15 EOL Resistance
To set the EOL Resistance:
1.
Scroll to the EOL RESISTANCE programming
option.
2.
Press SELECT.
3.
Scroll to the desired EOL Resistance settings.
For more detail on settings refer to Section 7.4,
Wiring the Zone Inputs.
4.
Press SAVE to update the setting.
10.3.16 SMS Auth Mode
To set the SMS Auth Mode:
1.
Scroll to the SMS Auth Mode programming
option.
2.
Press SELECT.
3.
Scroll to the desired xxxx settings.
4.
Press SAVE to update the setting.
10.3.17 Pace and Pin
To set the Pace and Pin:
1.
Scroll to the SMS Auth Mode programming
option.
2.
Press SELECT.
3.
Scroll to the desired xxxx settings.
4.
Press SAVE to update the setting.
10.3.18 Restore on Unset
To set Restore on Unset:
1.
Scroll to the SMS Auth Mode programming
option.
2.
Press SELECT.
3.
Scroll to the desired xxxx settings.
4.
Press SAVE to update the setting.
...SHOW STATE...
BACK
SELECT
ENABLED
BACK
SAVE
...EOL RESISTANCE...
BACK
SELECT
...DUAL EOL 4K7 2K2...
BACK
SAVE
...SMS AUTH MODE...
BACK
SELECT
Xxxx
BACK
SAVE
...PACE AND PIN...
BACK
SELECT
Xxxx
BACK
SAVE
..RESTORE ON UNSET..
BACK
SELECT
Xxxx
BACK
SAVE
