Selecting Multiple Gestations
1
Press CALIPER key.
2
Roll TRACKBALL to top of Measurement menu to highlight B, C or D (default is singleton-A).
3
In prompt box answer YES to multiple gestations question.
4
Use TRACKBALL to select YES, press SET key.
Measuring the Heart Rate with M- Mode
1
Press M-Mode key and obtain M-Mode cursor.
2
Position cursor, press M-Mode key again for tracing.
3
Obtain sweep, press FREEZE key.
4
Press Caliper key.
5
Select HR (heart rate) from SOFT KEY menu.
6
Roll TRACKBALL to place measurement marker at the beginning of the cardiac cycle, press SET key.
7
Roll TRACKBALL to place second measurement marker at the end of the first cardiac cycle, press SET key. Heart rate will
be displayed on screen and transferred to Worksheet
Editing Measurements in the Worksheet
1
Rotate SELECT control to highlight Worksheet in the control Menu, press SELECT control.
2
Roll TRACKBALL to the value to be deleted/edited, press SET key.
3
Use the keyboard to delete or edit value.
4
Press ENTER, system updates the value.
Measure AFI using 4B
1
Rotate the SELECT control to highlight 4B in the control menu, press SELECT control.
2
Obtain first quadrant image, press Freeze.
3
Repeat process until 4 quadrant images have been obtained.
4
Press CALIPER key.
5
Rotate SELECT control to highlight Page, press to select page 2/3.
6
Rotate SELECT control to highlight AFI menu, press SELECT control.
7
Place first measurement marker, press SET key.
8
Place second measurement marker, press SET key.
9
Repeat this process in each quadrant.
10
Press 2D control to exit 4B.
Note: AFI will be displayed on screen and transferred to Worksheet.
DIMAQ: Reviewing and Selecting Images/Studies
To review images stored during an active exam
1
Press Patient Browser key on the control panel.
2
Active patient images stored will be displayed.