background image

en 

Installation and connection

12

Sensors

The sensors adjust the programme
sequence and strength in the auto-
matic programmes depending on the
level and type of soiling.
The sensor has different sensitivity
settings that can be changed in the
basic settings. 
→ 

"Changing basic settings",

Page 38

Sensor setting

Description

Standard

Optimum setting for a
mixed load and heavily
soiled tableware. Saves
both energy and water.

Sensitive

Adjusts the programme
strength for effective re-
moval of food remnants
even with low soiling
levels. Energy and water
consumption are adjusted
accordingly.

Very sensitive

Adjusts the programme
strength for difficult condi-
tions of use, e.g. stubborn
dried-on food remnants.
Recommended setting
when using organic or eco-
logical detergents contain-
ing low levels of active
agents. Energy and water
consumption are adjusted
accordingly.

autoOpen Dry

The appliance door opens automatic-
ally during the drying phase. This en-
sures a particularly economical dry-
ing result.
For best drying results wait until the
end of programme before unloading
the tableware. The programme has
ended when the display shows "Fin-
ished".

If the automatic door opening is de-
activated, energy consumption in-
creases and the drying phase is usu-
ally reduced.
→ 

"Overview of basic settings",

Page 37

Installation and connection

Installation and connec-
tion

Installation and connection

Scope of supply

After unpacking all parts, check for
any damage in transit and complete-
ness of the delivery.
If you have any complaints, contact
the dealer who sold you the appli-
ance or our Customer Service.

Note: 

The appliance was tested at

the factory to check it is in working
order. It is possible that water has left
marks on the appliance. These
marks will disappear after the first
wash cycle.
The delivery consists of the following:

¡

Dishwasher

¡

Operating instructions

¡

Installation Instructions

¡

Warranty

¡

Installation material

¡

Steam guard plate

¡

Mains cable

¡

Quick reference guide

Installing and connecting the
appliance

You can position your built-under or
integrable appliance in a fitted kit-
chen between wooden and plastic
walls. If you subsequently install your
dishwasher as a free-standing appli-
ance, you must stop it from tipping
over, e.g. by screwing it to the wall or

Содержание SN47YS01CS

































































Отзывы: