Siemens SN25M831TI, Руководство по эксплуатации

Страница: 13 / 42

Utensils en
13
3. Hold down programme button
#
and press START button
h
until
•
:
‹
.... is indicated on the digital
display.
4. Release both buttons.
The LED for button
#
flashes and
the digital display
)*
displays the
factory setting
•
:
‹…
.
5. Press programme button
#
until
the factory set value
§
:
ܠ
is
indicated on the digital display
)*
.
To change the setting:
1.
Press programme button
3
.
Each time the button is pressed, the
set value increases by one level;
when the value of
§
:
‹‡
has been
reached, the display jumps back
to
§
:
‹‹
(off).
2. Press START button
h
.
The set value is saved.
Switching off rinse aid refill
indicator
If the rinse-aid refill indicator
H
is
impaired (e.g. when using combined
detergents containing rinse aid
component), it can be switched off.
ヽ
Proceed as described under “Setting
amount of rinse aid” and set the
value to
§
:
‹‹
.
The rinse aid refill indicator
H
is now
switched off.
-
Utensils
U t en s i l s
Not suitable
ヽ
Cutlery and utensils made of wood.
ヽ
Delicate decorative glasses, craft
and antique utensils. These decors
are not dishwasher-proof.
ヽ
Plastic parts not resistant to heat.
ヽ
Copper and tin utensils.
ヽ
Utensils which are soiled with ash,
wax, lubricating grease or ink.
Aluminium and silver parts have a
tendency to discolour and fade during
the wash cycle. Even some types of
glass (e.g. crystal glass objects) may
turn cloudy after many wash cycles.
Glass and utensil damage
Causes:
ヽ
Glass type and glass production
process.
ヽ
Chemical composition of the
detergent.
ヽ
Water temperature of the wash
programme.
Recommendation:
ヽ
Use only glasses and porcelain
which the manufacturer designates
as dishwasher-proof.
ヽ
Use a detergent which protects
utensils.
ヽ
Take glass and cutlery out of the
dishwasher as soon as possible after
the programme ends.