Private Communication Systems
Mobile Phones
3.2Disassembling the SL10
Caution!
Inside the telephone there are three flexible cables, which are very sensitive to any kind of
mechanical damage. Please be careful during all the disassembling process not to damage
them e.g. by bending or snapping.
3.2.1Necessary tools
For disassembling the SL10 the following tools are
mandatory:
- Metal blade
- Catch lever
- Screwdriver Torx 6
- Tweezer
3.2.2Disassembling the Mobile
1. Remove battery and SIM-Card
2. Unscrew antenna.
1. Remove the two countersunk-head screws at the lower end of the telephone (below vent plug) and inside
the battery department.
2. Move slide all the way to the open position.
3. Undo the slide stop by inserting the metal strip on the left side between the slide
and the base.
1. Turn the mobile over and push the metal strip through until it is visible above the keypad.
Service Manual SL10
V1.1
PN MP ST
R. Fleuren
Sm_sl10_lvl2_v11.doc
Page
6
of 23
05/98
