![Siemens SK Series Скачать руководство пользователя страница 32](http://html.mh-extra.com/html/siemens/sk-series/sk-series_operating-instruction_378428032.webp)
en
Installation and connection
32
5
Installation and
connection
I
n
s
t
a
l
l
a
t
i
o
n
a
n
d
c
o
n
n
e
c
t
i
o
n
The dishwasher must be connected
correctly, otherwise it will not function
properly. The specifications for the inlet
and outlet as well as the electrical
connected loads must correspond with
the required criteria as
specified in the following paragraphs
or in the installation instructions.
Install the appliance in the correct
sequence:
1.
Checking appliance on delivery
2.
Installing the appliance
3.
Waste water connection
4.
Drinking water connection
5.
Electrical connection
Product package
If you have any complaints, contact
the dealer where you purchased
the appliance or our customer service.
ヽ
Dishwasher
ヽ
Instructions for use
ヽ
Installation instructions
ヽ
Warranty*
ヽ
Installation materials
ヽ
Steam guard plate*
ヽ
Power cord
* depending on model
Safety instructions
Please follow the safety instructions
under “Installation”.
Delivery
Your dishwasher has been checked
thoroughly in the factory to ensure that it
is in working order. This may cause
small water stains. These will disappear
after the first wash cycle.
Technical specifications
Weight:
max. 24 kg
Voltage:
220–240 V, 50 Hz or 60 Hz
Connected load:
2.0–2.4 kW
Fuse:
10/16 A (UK 13A)
Power input:
off mode (Po)* 0.10 W
left on mode (Pl)* 0.10 W
*according to regulations (EU) nos.
1016/2010 and 1059/2010
Additional functions and settings may
increase the power input.
Water pressure:
at least 0.05 MPa (0.5 bar), maximum
1 MPa (10 bar). At a higher water
pressure: connect pressure-reducing
valve ahead.
Inlet rate:
minimum 10 litres/minute
Water temperature:
max. temperature 25 °C