Siemens SITRANS LUT400, Руководство по эксплуатации

Страница: 512 / 601

A5E33329501 SITRANS LUT400 (HART) – OPERATING INSTRUCTIONS Page 199
mmm
mm
Pa
ra
m
e
te
rs
2.16.1. Daily Totalizer
Read only. Current daily totalizer value. (Automatically resets daily and can be
reset by user.)
2.16.2. Running Totalizer
Read only. Current running totalizer value. (Reset only by user.)
2.16.3. Totalizer Decimal Position
Sets the maximum number of decimal places to be displayed.
2.16.4. Totalizer Multiplier
Use this feature if the LCD Total increments by an amount that is too large (or
too small).
Enter the factor (powers of 10 only) by which actual flow is divided, prior to
display on LCD. Use a value such that the eight-digit totalizer doesn’t roll over
between readings.
Example: For an LCD Total display in 1000s of flow units, enter
1000.
2.16.5. Reset Daily Totalizer
Select YES to reset daily totalizer value to zero.
Values
Range: 0.00 to 999999999
Default: 0.00
Values
Range: 0.00 to 999999999
Default: 0.00
Options
NO DIGITS no digits after the decimal point
1 DIGIT 1 digit after the decimal point
* 2 DIGITS 2 digits after the decimal point
3 DIGITS 3 digits after the decimal point
Options
.001
.01
.1
* 1
10
100
1000
10,000
100,000
1,000,000
10,000,000
Options
* NO
YES