SITRANS LH300 (7MF1575..) Transmitter for hydrostatic level
A5E37897183-AA, 09/2016
15
NOTICE
Faulty measurement caused by dirt
The pressure transmitter can become soiled by the process medium.
•
Prevent any dirt accumulating on the entry openings on the protective cover of the pressure transmitter.
7.4
Return procedure
Enclose the bill of lading, return document and decontamination certificate in a clear plastic pouch and attach it firmly to the
outside of the packaging.
Required forms
●
Delivery note
●
Return document (
http://www.siemens.com/processinstrumentation/returngoodsnote
)
with the following information:
–
Product (item description)
–
Number of returned devices/replacement parts
–
Reason for returning the item(s)
●
Decontamination declaration (
http://www.siemens.com/sc/declarationofdecontamination
)
With this declaration you warrant "that the device/replacement part has been carefully cleaned and is free of residues.
The device/replacement part does not pose a hazard for humans and the environment."
If the returned device/replacement part has come into contact with poisonous, corrosive, flammable or water-
contaminating substances, you must thoroughly clean and decontaminate the device/replacement part before returning it
in order to ensure that all hollow areas are free from hazardous substances. Check the item after it has been cleaned.
Any devices/replacement parts returned without a decontamination declaration will be cleaned at your expense before
further processing.
7.5
Disposal
Devices identified by this symbol may not be disposed of in the municipal waste
disposal services under observance of the Directive 2012/19/EC on waste electronic
and electrical equipment (WEEE).
They can be returned to the supplier within the EC or to a locally approved disposal
service. Observe the specific regulations valid in your country.
Further information about devices containing batteries can be found at: Information on
battery/product return (WEEE)
(
https://support.industry.siemens.com/cs/document/109479891/
)
Note
Special disposal required
The device includes components that require special disposal.
•
Dispose of the device properly and environmentally through a local waste disposal contractor.
8
Technical specifications
Gauge pressure input
Measured variable
Hydrostatic level
Measuring range, max.
Measuring range
Maximum operating pressure MAWP (PS)
