SITRANS FCT030 transmitter
10
A5E03922778-01, 03/2012
Signal input
Passive
Start dosing, stop
dosing, reset tot.
1, reset tot. 2,
reset tot. 3, reset
all totalizers, start
zero point
adjustment,
pause/resume
dosing, force
output, or freeze
output
X
X
8
H[W
8
IOXC
IOXa+
+
-
IOXp-
)&
IOXC
IOXa+
IOXp-
,VLJQDO
Relay output
Alarm class, alarm
number, one-
stage dosing, or
two-stage dosing
X
X
IOXC
IOXa+
IOXp-
)&
IOXC
IOXa+
IOXp-
Normally open
Relay output
Alarm class, alarm
number, one-
stage dosing, or
two-stage dosing
X
X
)&
IOXa+
IOXp-
IOXC
Normally closed
Note
Load
Signal output: < 500 Ω
Relay output: 30 V AC/DC, 100 mA
Connection check-up
1.
Check individual wire installation by tugging firmly.
2.
Firmly tighten cable glands and insert blanking plugs in unused cable entries.
3.
Remove o-ring from lid.
4.
Reinstate lid and screw in until mechanical stop. Wind back lid by one turn.
5.
Mount o-ring by pulling it over the lid and tighten lid cover until you feel friction from the o-ring on both sides. Wind lid by
one quarter of a turn to seal on the o-ring.
6.
Reinstate and tighten lid lock screw where supplied.
7.
Ensure that moisture does not penetrate to inside of electronics housing by creating a drip loop (bend cables downward)
immediately before cable glands.