Siemens SITRANS FCT030 Скачать руководство пользователя страница 1 | Manualshive

Страница: 1 / 32

Siemens SITRANS FCT030 Скачать руководство пользователя страница 1

SITRANS F

Coriolis Flowmeters

SITRANS FCT030 transmitter

Quick Start

Before installing, including in hazardous areas, refer to the Operating Instructions on the internet or on the SITRANS F

literature CD-ROM. They contain detailed safety regulations, information and specifications which must be observed when

installing. Documentation and approvals can be found on the internet:
Flowdocumentation (

http://www.siemens.com/flowdocumentation

CAUTION

Correct, reliable operation of the device requires proper transport, storage, positioning and assembly. The device must be

carefully operated and maintained. Only qualified personnel should install or operate this device.

Items supplied

Compact system

● SITRANS FC430 sensor and compact mounted

transmitter

●  Packet of cable glands
●  Quick Start guide
●  CD containing software, certificates and device manuals

/

Remote system
With M12 connection

●  SITRANS FCS400 sensor
●  SITRANS FCT030 transmitter with M12 socket assembled
●  Mounting bracket and cushion pad
●  Sensor cable with M12 connector
●  Packet of cable glands
●  Quick Start guide
●  CD containing software, certificates and device manuals

/

© Siemens, All rights reserved Ⓟ 2012
A5E03922778-01, 03/2012

1

*A5E03922778*

1
2
3
...
»

Содержание SITRANS FCT030

































Отзывы:

Нет отзывов