Siemens SISTORE AX16 500/200 V3.6, Инструкция по установке

Страница: 12 / 184

Operation
12
Siemens Building Technologies EN
Fire Safety & Security Products 12.2008
Search button
When in the live mode, pressing the
Search
button enters the Triplex mode.
RW (Rewind) button
Pressing the
RW
button plays video backward at high speed. Pressing the button
again toggles the playback speed from , and . The screen displays ,
and respectively.
Previous button
Pressing the
Previous
button goes to the previous image.
Play/Pause button
Pressing the
Play/Pause
button plays back images at regular speed. Pressing the
button while in the Playback mode pauses the video. The screen displays when
the DVR is playing back video. The screen displays when in the Pause mode.
Next button
Pressing the
Next
button goes to the next image.
FF (Fast Forward) button
Pressing the
FF
button plays video forward at high speed. Pressing the button
again toggles the playback speed from , and . The screen displays ,
and respectively.
Zoom button
Pressing the
Zoom
button zooms the current image on the screen. A PIP with a
rectangle temporarily displays showing what area of the screen has been enlarged.
You can use the arrow buttons to move the rectangle to another area. Pressing the
Enter button toggles the zoom size between 2x, 3x and 4x.
7.3 Front panel buttons and LEDs
Camera
(1-8/16)
Pressing the individual camera buttons will cause the selected camera to display full
screen. Buttons 1 to 9 are also used to enter passwords.
PTZ Pressing the
PTZ
button enters the PTZ (Pan/Tilt/Zoom) mode which allows you to
control properly configured cameras.
Sequence When in the live mode, pressing the
Sequence
button displays another full live channel
sequentially. When in one of the multi-view formats, pressing this button will cause the
DVR to sequence cameras in two sequence modes: “Page” and “Cameo”. In the Page
mode, the DVR sequences through user-defined screen layouts (pages). In the Cameo
mode, the bottom, right screen to display live cameras sequentially. Pressing the
Sequence button while in the Sequence mode will exit the Sequence mode. The button
is also used for Zoom Out while in the PTZ mode.
Freeze Pressing the Freeze button freezes the current live screen. In the Search mode clip-
copying can be done instantly by pressing and holding the button for two or more
seconds. The button is also used for Near Focus in the PTZ mode.
Alarm The Alarm button has two functions. First, it will reset the DVR’s outputs including the
internal buzzer during an alarm. Second, it will display the event log when you are in the
live monitoring mode unless there is an active alarm. This operation can be user
password protected. The button is also used for Far Focus while in the PTZ mode.
Spot Pressing the Spot button allows you to select which cameras will display on the four
Spot Monitors. After selecting the monitor you can opt to have that Spot Monitor displays
a single camera or all cameras sequentially. The infrared remote control allows you to go
directly to the individual Spot Monitor menus. The button is also saves Presets in PTZ
mode.