Siemens SINUMERIK 840Di sl, Руководство по вводу в эксплуатацию

Страница: 383 / 632

NC Commissioning with HMI Advanced
11.4 Memory configuration
Manual
Commissioning Manual, 05/2008, 6FC5397–4CP10–4BA0
383
Number Name Name/remarks
28060 MM_IPO_BUFFER_SIZE Number of NC blocks in the IPO buffer
28070 MM_NUM_BLOCKS_IN_PREP Number of blocks for block preparation
28090 MM_NUM_CC_BLOCK_ELEMENTS Number of block elements for Compile cycles
28100 MM_NUM_CC_BLOCK_USER_MEM Size of block memory for Compile cycles
28105 MM_NUM_CC_HEAP_MEM Heap memory for compile cycle applications
28210 MM_NUM_PROTECT_AREA_ACTIVE Number of simultaneously active protection zones
28500 MM_PREP_TASK_STACK_SIZE Stack size of preparation task
28510 MM_IPO_TASK_STACK_SIZE Stack size of IPO task
28550 MM_PRSATZ_MEM_SIZE Available memory for internal blocks
Axisspecific ($MA_ ... )
38010
MM_QEC_MAX_POINTS Number of values for quadrant error compensation
11.4.2 SRAM memory
Free memory
The free SRAM memory is displayed via the following machine data:
●
MD18060 $MN_INFO_FREE_MEM_STATIC (free static memory)
The free SRAM should not be less than 15,000 bytes to ensure that data (e.g. tool offsets)
can be read in at all times.
Reconfiguation of the SRAM memory
Modifying the machine data listed in the following table results in a reconfiguration of the
SRAM with a loss of all user data. Before the change becomes effective in the NC, the
following alarm message is generated:
●
Alarm "4400 MD change results in reorganization of the buffered memory (loss of data!)"
NOTICE
When reconfiguring the SRAM memory, all user data are lost. To avoid data losses, a
series startup file should be created before reconfiguration (see Section "Creating a
Series Startup File" (Page 543)).