Siemens SINUMERIK 840Di sl, Руководство по вводу в эксплуатацию, Страница: 250 / 632

PROFIBUS DP Communication
8.5 DP slave I/O Module PP72/48
Manual
250
Commissioning Manual, 05/2008, 6FC5397–4CP10–4BA0
8.5 DP slave I/O Module PP72/48
8.5.1 Parameterization of I/O Module PP72/48
A PP72/48 I/O module is parameterized with a GSD file.
●
The GSD file is a part of the SINUMERIK 840Di sl software. Refer to Section "Overview
of software components" (Page 31): SIMATIC add-on software: GSD file for I/O modules
PP72/48
● To install a GSD file, please refer to Subsection "Network rules" (Page 234): GSD files.
Note
To make parameterization of isochronous communication with PROFIBUS DP easier, we
recommend inserting all required DP slaves into the configuration before setting the times
for isochronous communication.
8.5.2 Inserting the DP slave
To insert a PP72/48 DP slave in the configuration, open the hardware catalog via the menu
command View > Catalog.
The DP slave PP72/48 is to be found at:
●
Profile: Standard
PROFIBUS-DP > Other field devices > Drives > IO > PP Input/Output module
Click with the left mouse button on the DP slave PP72/48 (PP input/output module) in the
hardware catalog and drag it onto the DP master system in the station window, holding down
the left mouse button.
The DP master system is displayed in the station window with the following symbol:
When you release the left mouse button, the DP slave PP72/48 is inserted into the
configuration.
Note
Make sure that the cursor that appears as a crossed-out circle when dragging the DP slave
is positioned exactly on the DP master system so that it can be inserted into the
configuration.