Siemens SINUMERIK 828D Turning, Руководство по эксплуатации

Страница: 351 / 940

Commissioning Manual SINUMERIK Operate / SINUMERIK 840D sl
9.16.4 Changing a cycle call
You have called the desired cycle via softkey in the program editor, entered the parameters
and confirmed with "Accept".
Procedure
1. Select the desired cycle call and press the <Cursor right> key.
The associated input screen of the selected cycle call is opened.
- OR -
Press the <SHIFT + INSERT> key combination.
This starts the edit mode for this cycle call and you can edit it like a normal
NC block. This means that it is possible to generate an empty block before
the cycle is called. For instance, to insert something before a cycle that
is located at the beginning of the program.
Note: In edit mode, the cycle call can be changed in such a way that it
can no longer be recompiled in the parameter screen.
You exit the edit mode by pressing the <SHIFT + INSERT> key combi‐
nation.
- OR -
You are in the edit mode and press the <INPUT> key.
A new line is created after the cursor position.
9.16.5 Programming variables
In principle, variables or expressions can also be used in the input fields of the screen forms
instead of specific numeric values. In this way, programs can be created very flexibly.
Input of variables
Please note the following points when using variables:
● Values of variables and expressions are not checked since the values are not known at the
time of programming.
● Variables and expressions cannot be used in fields in which a text is expected (e.g. tool
name).
An exception is the "Engraving" function, in which you can assign the desired text in the
text field via a variable as "Variable text".
● Selection fields generally cannot be programmed with variables.
Creating a ShopMill program
9.16 Calling technology functions
Milling
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
351