Siemens SINAMICS S150 NEMA страница 32 Скачать руководство пользователя

Страница: 32 / 862

Device overview

2.2 Applications, characteristics

Enclosed Drives

Operating Instructions, 12/2018, A5E36652151A

2.2.2

Features, quality, service

Features

The self-commutating, pulsed infeed/feedback unit, which is based on IGBT technology and

is equipped with a clean-power filter, makes the minimum of demands on the line – and is

very line friendly:

●

The innovative clean-power filter minimizes line-side harmonics

●

The total harmonic distortion factors of current THD(I) and voltage THD(U) are typically in

the range of approx. 3%.

●

Power feedback (four-quadrant operation)

●

Tolerant vis-à-vis fluctuations in the supply voltage

●

Operation on weak lines

●

Reactive power compensation is possible (inductive or capacitive)

●

High drive dynamics

In addition, factors have been considered to ensure easy handling of the drive from the

planning and design phase through to operation. These factors include:

●

Compact, modular, service-friendly design

●

Straightforward planning/design and commissioning using the SIZER and STARTER

tools

●

Ready to connect to facilitate the installation process

●

Quick, menu-driven commissioning with no complex parameterization

●

Clear and convenient drive monitoring/diagnostics, commissioning and operation via a

user-friendly graphic operator panel with measured values displayed in plain text or in a

quasi-analog bar display.

●

SINAMICS is an integral part of Totally Integrated Automation (TIA). The TIA concept

offers an optimized range of products for automation and drive technology. This concept

is characterized by planning / design, communication, and data management procedures

that are consistent throughout the product range. SINAMICS is fully integrated in the TIA

concept.

Separate S7/PCS7 blocks and faceplates for WinCC are available.

●

Integration in SIMATIC H systems is possible via a Y link.

●

Drive Control Chart (DCC)

Drive Control Chart (DCC) expands the possibility of very simply configuring technological

functions for the SINAMICS drive system.

The block library encompasses a large selection of closed-loop, arithmetic and logic

function blocks, as well as more comprehensive open-loop and closed-loop control

functions. The user-friendly DCC editor enables easy graphical configuration and a clear

representation of control loop structures as well as a high degree of reusability of existing

diagrams. DCC is an add-on to the STARTER commissioning tool.

Содержание SINAMICS S150 NEMA































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание SINAMICS S150 NEMA

Отзывы:

Похожие инструкции для SINAMICS S150 NEMA

Бренды по названию

Популярные бренды

Siemens SINAMICS S150 NEMA, Руководство по эксплуатации

Результаты поиска

Содержание SINAMICS S150 NEMA

Отзывы:

Похожие инструкции для SINAMICS S150 NEMA

Бренды по названию

Популярные бренды