Description of the motor
1.3 Technical features
1PM6/1PM4 Hollow-Shaft Motors for Main Spindle Drives
Configuration Manual, PPMS, 04/2008, 6SN1197-0AD23-0BP0
17
1.3
Technical features
Table 1-1
Technical features
Technical feature
Version
1PM6
1PM4
Insulation of the stator winding in acc.
with EN 60035 (IEC 60034-1)
Temperature class 155 (F) for a coolant
temperature of up to +40 °C
Temperature class 155 (F) for a coolant
temperature of up to +30 °C
Installation altitude according to
EN 60034-1 (IEC 60034-1)
≤ 1000 m above sea level, otherwise
power derating
Type of construction according to
EN 60034-7 (IEC 60034-7)
IM B5 (IM V1, IM V3)
IM B35 (IM V15, IM V36)
Degree of protection to
EN 60034-5 (IEC 60034-5)
IP55, fan IP54
IP65, IP55 on shaft exit
Permissible coolant temperature
-15 ... +40 °C
Coolant intake temperature
Due to the risk of condensate formation,
a coolant intake temperature of up to
+30 °C is recommended depending on
the prevailing ambient conditions.
Temperature monitoring acc. to
EN 60034-11 (IEC 60034-11)
2 temperature sensors KTY 84 in the stator winding, 1 as reserve
Paint finish
Anthracite, similar to RAL 7016
2. rating plate
Enclosed separately
Drive shaft end according to
DIN 748-3 (IEC 60072-1)
Plain shaft, without fitted key
Hollow-shaft bore
∅ 11.5 mm
Radial eccentricity, concentricity and
axial eccentricity acc. to
DIN 42955 (IEC 60072-1)
Tolerance R (reduced)
Vibration severity according to
EN 60034-14 (IEC 60034-14)
Grade A is observed up to rated speed
Sound pressure level according to
DIN EN ISO 1680
From drive end to non-drive end (when
fan is operating on a 50 Hz supply)
70 dB(A) +3 dB(A)
2)
69 dB(A) +3 dB(A)
2)
Built-in encoder systems for motors
without DRIVE-CLiQ interface
Incremental encoder, sin/cos 1 Vpp, 256 S/R
1)
without C and D tracks
(IN256S/R encoder)
Built-in encoder systems for motors
with DRIVE-CLiQ interface
Incremental encoder, 19-bit (resolution 524288, internal 256 S/R), without
commutating position (Encoder IN19DQ)
Terminal box arrangement (when
viewing the DE)
For axial fan:
Top, rotatable 4 x 90°
For radial fan:
On right side, rotatable 4 x 90°
Top, rotatable 4 x 90°
Terminal box connection type
•
Motor
•
Fan (1PM6 only)
•
Encoder system and temperature
sensor
Terminals in terminal box
Terminals in terminal box
17-pin circular socket (without mating
connector or DRIVE-CLiQ)
Terminals in terminal box
---
17-pin circular socket (without mating
connector or DRIVE-CLiQ)
Options
L37 = higher maximum speed
1)
S/R = signals/revolution
2)
With option L37: 72 dB(A) +3 dB(A)
