manualshive.com logo in svg

Siemens SINAMICS CONNECT 500, Руководство по эксплуатации

Поделиться
Скачать
Siemens SINAMICS CONNECT 500 Скачать руководство пользователя страница 27

Connection

6

6.1

Connect the LAN cable to the IPC (premounted version of the 

connectivity module)

For operation, connect the connectivity module with your company network and the Internet via 

the LAN interface of your IPC. 

Note
When carrying out any work, carefully observe the five safety rules (Page 8).

Procedure

1. Open the control cabinet of the converter.
2. In the control cabinet, locate where the IPC is installed.  
3. Route the LAN cable into the control cabinet.
4. Route the LAN cable to the IPC.

Note
Maintain the permissible cable bending radius. Route the cable so that it does not come into 

contact with any sharp edges.

5. Connect the LAN cable to interface "X1 P1" of the IPC.

①

Interface X1 P1

6.2

Connection (connectivity module version that can be retrofitted)

The instructions to mount and install the connectivity module version that can be retrofitted are 

provided in the Internet (

https://support.industry.siemens.com/cs/ww/en/ps/25520

).

SINAMICS CONNECT 500

Operating Instructions, 10/2019

25

Содержание SINAMICS CONNECT 500





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды