Siemens SIMOTION P320-3, Руководство пользователя

Страница: 50 / 150

Hardware description
3.4 SIMOTION P state application
SIMOTION P320-3 and Panel Fronts
50
Manual, 02/2012
3.4.2 LED display
The meaning of the LEDs and their colors is described in the table below.
Table 3- 7 Meaning of LEDs
LED Meaning
SF (red)
1
This LED indicates a fault state or underlicensing of the SIMOTION P.
5 VDC (green)
SIMOTION P voltage on
This LED indicates that the voltage is present at P.
RUN (green) -
SIMOTION P in RUN mode
2
This LED indicates that the user program is running.
STOPU (yellow) -
SIMOTION P in STOP user
program mode
This LED indicates that the technology packages (for example, synchronous operation
and cam) are active. Test and commissioning functions can be executed without a user
program. The user program is not active.
STOP (yellow) -
SIMOTION P in STOP mode
2
This LED indicates that no user program is running. The technology packages are not
active.
BUS1F (red) - group fault Not relevant as no PROFIBUS DP interface available.
BUS2F (red) - group fault Not relevant as no MPI/DP interface available.
1
SF LED is also displayed for the hardware
2
RUN/STOP LED is also displayed for the hardware and encompasses the RUN and STOP LED:
Green = RUN mode
Yellow = STOP mode
3.4.3 Mode selector
The mode selector is used to set the SIMOTION P application to different states. You can
switch the control to RUN or STOP/STOPU and perform an overall reset.
A system status activated with the mode selector has priority over a status selected via
SIMOTION SCOUT. Consequently, you cannot switch the control to RUN mode via
SIMOTION SCOUT while the mode selector is set to STOP/STOPU on the
SIMOTION P320-3. You must use the mode selector for this.
Further information on the mode selector function can be found in the SIMOTION P320-3
and Panel Fronts Commissioning and Hardware Installation Manual.