Siemens SIMOTION D410, Руководство по вводу в эксплуатацию

Страница: 201 / 230

Diagnostics data
6.2 Diagnostic data and non-volatile SIMOTION data
SIMOTION D410
Commissioning Manual, 02/2012
201
6.2 Diagnostic data and non-volatile SIMOTION data
6.2.1 Overview
With easy operator actions (e.g. by means of switch position) and without the
SIMOTION SCOUT engineering system, the following options exist as of V4.1 SP2 for
backing up the diagnostic data and non-volatile SIMOTION data:
●
Back up diagnostic data, including non-volatile SIMOTION data (retain data) to the
CompactFlash Card. For details, refer to the section titled Backup of diagnostic data and
non-volatile SIMOTION data (Page 201)
● Back up websites to the CompactFlash Card, including the most up-to-date content for
diagnostic purposes, refer to the section titled Diagnostics via websites (Page 206)
● Restore backed-up non-volatile SIMOTION data (retain data), see section
Deleting/restoring non-volatile SIMOTION data (Page 207)
6.2.2 Backup of diagnostic data and non-volatile SIMOTION data
6.2.2.1 Diagnostic data
Following a fault on a SIMOTION device, diagnostic data (e.g. diagnostic buffer content, up-
to-date content of websites, etc.) can provide important information on the cause of the fault.
For this purpose, these data can be backed up to the CompactFlash Card using a simple
operation (e.g. by setting a switch on the D410).
You then have the following options for the diagnostic data:
●
Fetching them from the CompactFlash Card using a card reader
● Downloading them using IT DIAG or FTP
You can also use them for diagnostic purposes or provide technical support with them for
evaluation purposes.