manualshive.com logo in svg

Siemens SIMOTION D410-2, Руководство пользователя

Поделиться
Скачать
Siemens SIMOTION D410-2 Скачать руководство пользователя страница 31

 

Operator control (hardware) 

 

2.2 Operator controls 

SIMOTION D410-2 
Manual, 02/2012 

31

 

2.2.6

 

SIMOTION CompactFlash card 

Function 

The SIMOTION Kernel (SIMOTION D410-2 firmware) and the software used to control the 

drives (SINAMICS firmware) are contained on the CompactFlash card. 
The CompactFlash card (CF card) is used to 
●

 

Backup technology packages and user data 

●

 

Update (e.g. SIMOTION firmware update) 

Slot for CompactFlash card 

The CompactFlash card is inserted into the plug-in module over the blanking cover (see 

Overview of operator control and display elements (Page 25)).   

 

 

Note 
The CompactFlash card may only be inserted or removed while the module is in a de-

energized state. 

The SIMOTION D410-2 is in a de-energized state when all the LEDs are OFF. 
The CompactFlash card of the SIMOTION D410-2 must not be used in a SIMOTION D410, 

D4x5 or D4x5-2! 

 

Additional information 

For more information on writing and formatting the CompactFlash card, refer to the 

SIMOTION D410-2 Commissioning Manual. 

Содержание SIMOTION D410-2































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды