Siemens SIMOTICS XP 1MB155, Руководство по эксплуатации, Страница: 130 / 152

Spare Parts
10.7 Ordering example
1MB155 / 1MB555
128
Operating Instructions, 03/2018, A5E41926185A
10.7 Ordering example
Table 10- 1 Ordering example
End shield, drive end 1.40 End shield
Machine type * 1MB1553-1EB43-4AB4
Ident: No. * UD 1504/156750601
* corresponding to the rating plate
Take the type and serial number from the rating plate and the machine documentation.
When replacing rolling bearings, in addition to the bearing identification code, the
replacement code for the bearing version is required. Both of these codes are specified on
the rating plate and in the machine documentation. They are also shown on the installed
bearings.
The graphical representations in this chapter show schematic diagrams of the basic
versions. They are used for spare part definitions. The supplied version may differ in details
from these representations.
10.8 Machine parts
Part Description Part Description
1.00 DE bearings 5.52 Cable entry
1.30 Bolt 5.53 Sealing plug
1.31 Spring washer 5.55 Nut
1.34 Spring washer 5.63 Mounting rail
1.40 End shield 5.65 Bolt
1.43 Shaft sealing ring 5.70 Terminal clamp
1.44 Bearing cover 5.76 Clamping plate/contact bracket
1.49 Bolt 5.78 Spring washer
1.59 Locking ring 5.79 Screw
1.60 Rolling bearing 5.83 Seal
1.64 DE bearing cover, inner 5.84 Terminal box cover
1.65 Grease nipple 5.89 Bolt
1.68 Grease slinger 5.94 Bolt
3.00 Rotor, complete 6.00 Bearings, NDE
3.02 Locking ring 6.02 Locking ring
3.38 Feather key 6.03 NDE bearing cover, inner
4.00 Stator, complete 6.10 Rolling bearing
4.04 Eyebolt 6.20 End shield
4.05 Washer 6.23 Shaft sealing ring
4.07 Housing foot 6.29 Bolt
4.10 Spring washer 6.32 Spring washer