manualshive.com logo in svg

Siemens Simotics HV C 1NA14544WA600AG0-Z, Инструкция по эксплуатации и монтажу

Поделиться
Скачать
Siemens Simotics HV C 1NA14544WA600AG0-Z Скачать руководство пользователя страница 59

Commissioning

7

Observe the following when carrying out any work on the machine:
● Comply with the general safety instructions (Page 13)
● Comply with the applicable national and sector-specific regulations.
● When using the machine within the European Union, comply with the specifications laid 

down in EN 50110‑1 regarding safe operation of electrical equipment.

Note
Service Center
Please contact the Service Center (Page 99) if you require commissioning support.

7.1

Prior to commissioning 

Once the system has been correctly installed, you should check the following prior to 

commissioning:

Note
Checks to be carried out prior to commissioning 
The following list of checks to be performed prior to commissioning does not claim to be 

complete. It may be necessary to perform further checks and tests in accordance with the 

specific situation on-site. 

● The machine is undamaged.
● The machine has been correctly installed and aligned, the transmission elements are 

correctly balanced and adjusted.

● All fixing screws, connection elements, and electrical connections have been tightened to 

the specified tightening torques.

● The operating conditions match the data provided in accordance with the technical 

documentation, such as degree of protection, ambient temperature, etc..

● Moving parts such as the coupling move freely.
● All touch protection measures for moving and live parts have been taken.

Electrical connection
● The grounding and equipotential bonding connections have been made correctly.
● The machine is connected so that it rotates in the direction specified.

SIMOTICS HV C  1NA14544WA600AG0-Z

Operating Instructions 06/2018

59

Содержание Simotics HV C 1NA14544WA600AG0-Z

















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды