Siemens SIMATIC RF680M, Руководство по эксплуатации

Страница: 85 / 108

SIMATIC RF680M Mobile Reader
Operating Instructions, 06/2011, J31069-D0241-U001-A2-7618
83
Advanced functions
10
When you are using the SIMATIC RF680M as a stand-alone product or in "Mobile" operating
mode (configured as editable through the "Edit Tag" function in RF-MANAGER), you can use
the extended functions of the SIMATIC RF680M that are described below.
10.1 File storage on the RF680M
Storing the read tag data using the data editor
The data read from the tag are automatically stored on the mobile reader to a file with the
name "READ.xml" in the "Flash Disk" directory.
Every subsequent read command overwrites this file.
Length of the written tag data
When writing to the tag, the write data are written from the Editor to the tag and also to the
"Flash Disk" folder of the mobile reader under the name "WRITE.xml". Every subsequent
write command overwrites this file.
Display Files
The function "File > Open" shows all files with the extension ".xml". You can select one of
these. This file is then loaded into the Editor. The file is not saved with the name READ.xml
or WRITE.xml.
Save files
The function "File > Save / Save Tag As" saves the data from the Editor to a file with the
extension ".xml" in the "Flash Disk" directory of the reader. You can enter any name with 1 to
8 alphanumeric characters.
Note
When you read the data from the tag, modify them in the Editor and then save them, the
modified data are saved to the .xml file.