Important Information
SIMATIC Rack PC IL 40, Getting Started
A5E00171493-02
1-3
Country-Specific Information
For the United States and Canada:
In the United States and Canada USA, a CSA or UL-listed power supply cable
must be used.
The male plug is a 5-15 style.
For operation with 120 V:
Use a UL Listed, CSA Labelles Cord Set, consisting of a min. 18 AWG. Type SVT
or STJ three conductor flexible cord, max. 4.5 m (15 feet) in length and a parallel
blade grounding type attachment plug rated 15 A, min 125 V.
For operation with 240 V:
Use a UL Listed, CSA Labeled Cord Set, consisting a min. 18 AWG. Type SVT or
SJT three conductor flexible cord, max. 4.5 m (15 feet) in length and a tandem
blade grounding type attachment plug, rated 15 A, 250 V.
For operation with 230 V (outside of USA and Canada)
Use a Cord Set consisting of a min 18 AWG cord and grounding type attachment
plug rated 15 A, 250 V. The cord set should have the appropriate safety approvals
for the country in which the equipment will be installed and marked
Repairs
Only authorized personnel are permitted to repair the Rack PC IL. Unauthorized
opening and improper repairs on the device can result in significant danger to the
user.
Before you open the device, first switch it off and then disconnect the power plug.
Install only system expansion devices provided for this computer. If you install
other expansion devices, you can damage the system or violate the safety
requirements and regulations for radio interference suppression. Contact your
technical support team or where you purchased your PC to find out which system
expansion devices may safely be installed.
!
Caution
There are fast-running fans in Rack PC IL 40 which may cause injury when
touched.
Note
There is a filter mat behind the front panel, check it regularly for dirt and change
it if necessary.
