Siemens SIMATIC PANEL PC 877 Скачать руководство пользователя

Страница: 244 / 288

Detailed descriptions

17.6 BIOS setup

SIMATIC Panel PC 877

17-52

Operating instructions, Release 07/2006, A5E00877780-01

Settings in the Advanced menu

Plug&Play means that all modules are automatically detected and installed,

providing they support the Plug&Play functionality.
[Other]

BIOS handles the entire Plug&Play capability, default setting.

[Win95]

BIOS handles the entire Plug and Play capability

[Win98]

The operating system handles some of the Plug&Play functions.

[WinMe]

The operating system handles the Plug&Play functions.

Installed O/S

[Win/2000/XP] The operating system handles the Plug&Play functions.
[Yes]

All installations under Plug and Play are deleted and the

configuration is retriggered the next time the system boots. The

entry is then reset to [No]. System components that do not support

Plug&Play have to be entered manually.

Reset

configuration

data

[No]

The Plug&Play system components are initialized after the next

system start.

[Primary]

[Secondary]

One IDE interface for max. two drives.

[Primary &

Secondary]

Two IDE interfaces for max. four drives.

Local bus IDE

adapter

[Disabled]

No local IDE interface.

[DOS]

The drive tables are adapted for DOS access operations in

accordance with Enhanced IDE.

Large disk

access mode

[OTHER]

The tables are not adapted.

USB boot:

This function defines whether the operating system can be booted from a USB

device.

Содержание SIMATIC PANEL PC 877

































































































































































































































































































Результаты поиска

Содержание SIMATIC PANEL PC 877

Отзывы:

Похожие инструкции для SIMATIC PANEL PC 877

Бренды по названию

Популярные бренды

Siemens SIMATIC PANEL PC 877, Руководство по эксплуатации

Результаты поиска

Содержание SIMATIC PANEL PC 877

Отзывы:

Похожие инструкции для SIMATIC PANEL PC 877

Бренды по названию

Популярные бренды