Siemens SIMATIC NET SINAUT ST7, Системное руководство

Страница: 179 / 328

Installing and putting a TIM into operation
5.4 Options for attachment and settings of the TIM 3 and TIM 4 variants
SINAUT ST7 Station control system - System Manual
System Manual, 05/2007, C79000-G8976-C178-06
179
2))
21
2))
21
FKDQQHOZLUH
ZLUHPRGH
7UDQVPLWOHYHO ಥ G%
ZLUHPRGH
FKDQQHOZLUH
%DXGUDWH
&KDUDFWHUIRUPDW
2)) 2))
2)) 21
1RUPDO
0RGH
$V\QFKURQELWV
$V\QFKURQELWV 2))
2))
2))
2))
2))
21
2)) 2)) 2)) 2))
7HVWVHQG
7HVWUHFHLYH 21 2)) 21 21
21 21 2)) 2))
7HVWI
EDXG
7HVWI
/
21 21 2)) 21
21 21 21 2))
7HVWI
+
21 21 21 21
21 2))
21 21
7UDQVPLWOHYHOG%
&RQWUROVLJQDO 576
6WDQGDUG 2))
6WDQGDUG 2))
UHVHUYHG
Figure 5-26 Possible DIL switch settings for the integrated MD2 modem
When the TIM 32 ships, all DIL switches are in the OFF position. This corresponds to the
following basic setting:
● Transmit level -6 dB
● 4-wire mode
● Channel 1 ON (fixed setting for 4-wire mode)
● Baud rate 1200 bps
● Normal operating mode
● Message consists of 11-bit asynchronous characters
● Control output switched with RTS (only relevant for wireless connection)
The following table contains more information on configuring these default settings
individually.
Table 5-17 Settings on the 5-pin DIL switch of the TIM 32
Setting on
DIL switch
Meaning
2))
21
Transmit level -6 dB / -15 dB
For more detailed information, refer to the description of the 10-pin DIL
switch at switch 10.