Siemens SIMATIC NET SCALANCE S615 Скачать руководство пользователя страница 192

Страница: 192 / 320

Description

The page contains the following boxes:
● Keep Alive

When this is enabled, the IP address is retained in the event of a connection breakdown and

is not reset to 0.0.0.0. Keep Alive is enabled by default. When Keep Alive is disabled, the IP

address is reset to 0.0.0.0 in the event of a communication breakdown.

● DHCP Client Configuration Request (Opt. 66, 67)

When enabled, the DHCP client uses the options to download the configuration file (option

67) from the TFTP server (option 66). After the restart, the device uses the data from the

configuration file.

Note
Configuration file and firmware version
The configuration file is used to store and read in configuration data within a firmware

version, e.g. 4.3. Configuration files created with a firmware version <4.2 cannot be read in

to a device with a firmware version 4.3.

● DHCP Mode

Specify the type of identifier with which the DHCP client logs on with its DHCP server.
– via MAC Address

Identification is based on the MAC address.

– via DHCP Client ID

Identification is based on a freely defined DHCP client ID.

– via System Name

Identification is based on the system name. If the system name is 255 characters long,

the last character is not used for identification.

– via Iaid and Duid

With this the DHCP client can log on with DHCP servers that support parallel operation

of IPv4 and IPv6.

The identification is via the IAID and the DUID and identifies precisely one IP interface

of the device.

IAID (Interface Association Identifier): At least one IAID is generated for each IP interface

The IAID remains unchanged when the DHCP client restarts

DUID (DHCP Unique Identifier): Uniquely identifies server and clients and applies to all

IP interfaces of the device. The DUID remains unchanged when there is a restart.

Note
DHCP mode "via PROFINET device name"
With firmware version 5.0, the setting "via PROFINET device name" was removed.

Configuring with Web Based Management
4.5 "System" menu

SCALANCE S615 Web Based Management

192

Configuration Manual, 11/2019, C79000-G8976-C388-08

Содержание SIMATIC NET SCALANCE S615

































































































































































































































































































































Результаты поиска

Содержание SIMATIC NET SCALANCE S615

Отзывы:

Похожие инструкции для SIMATIC NET SCALANCE S615

Бренды по названию

Популярные бренды

Siemens SIMATIC NET SCALANCE S615, Руководство по настройке

Результаты поиска

Содержание SIMATIC NET SCALANCE S615

Отзывы:

Похожие инструкции для SIMATIC NET SCALANCE S615

Бренды по названию

Популярные бренды