Siemens SIMATIC NET RUGGEDCOM RST2228 Скачать руководство пользователя страница 40

Страница: 40 / 58

Communication Ports

4.2 PoE Ports

Only compatible with SFP/SFP+ Transceiver Sockets.

Not compatible with SFP/SFP+ Transceiver Sockets.

4.2

PoE Ports

The RUGGEDCOM RST2228P supports up to twenty-four 10/100/1000 Mbps Power

over Ethernet (PoE) ports powered by an external power supply. Each port complies

with the IEEE 802.3af and IEEE 802.3at standards and features auto-sensing and au-

tomatic power off when cables are removed.
The total allowable power budget for all ports is 500 W. If the external power sup-

ply is less than ther PoE power demand, to prevent exceeding the power budget,

port priorities can be set via the RUGGEDCOM RST2228P operating system to disable

low priority ports when demand is too high. Ports can also be enabled/disabled and

placed on a power schedule to conserve power. For more information, refer to the

RUGGEDCOM ROS Configuration Manual

for the RUGGEDCOM RST2228P.

For information about connecting the external power supply, refer to

"Connecting

External PoE Power (Page 20)"

LEDs

Each port features an LED to indicates the state of the port.

State

Description

Green (Solid)

Link detected

Yellow (Solid)

Link detected and PoE established

Blinking

Link activity

Off

No link detected

Specifications

For specifications on the available PoE ports, refer to

"PoE Power Supply Specifica-

tions (Page 35)"

4.3

Available Modules

The following modules are available for use with the RUGGEDCOM RST2228P. For

more information about individual modules, refer to the

RUGGEDCOM Modules Cat-

alog

for the device available online.

Copper Ethernet Modules

RUGGEDCOM RMM2973-4RJ45

Specifications

Ports: 4
Port Type: RJ45

Article Numbers

6GK6297-3RD00-4AB0

(Standard)

RUGGEDCOM RST2228P

Installation Manual, 12/2019, C79000-G8976-1403-05

Содержание SIMATIC NET RUGGEDCOM RST2228



























































Результаты поиска

Содержание SIMATIC NET RUGGEDCOM RST2228

Отзывы:

Похожие инструкции для SIMATIC NET RUGGEDCOM RST2228

Бренды по названию

Популярные бренды

Siemens SIMATIC NET RUGGEDCOM RST2228, Руководство по установке

Результаты поиска

Содержание SIMATIC NET RUGGEDCOM RST2228

Отзывы:

Похожие инструкции для SIMATIC NET RUGGEDCOM RST2228

Бренды по названию

Популярные бренды