Siemens SIMATIC NET RUGGEDCOM RSG2200F, Руководство по установке

Страница: 31 / 54

Device Management
3.2 Configuring the Device
Pin
RJ45 Male DB9 Female
Name Description Comment
1 9 RI
c
Ring Indicator
a
The DSR, DCD and DTR pins are connected together internally.
b
The CTS and RTS pins are connected together internally.
c
RI is not connected.
Communication Ports
Connect any of the available Ethernet ports on the device to a management switch
and access the RUGGEDCOM RSG2200F console and Web interfaces via the device's
IP address. For more information about available ports, refer to " Communication
Ports (Page 23)" .
3.2 Configuring the Device
Once the device is installed and connected to the network, it must be configured.
All configuration management is done via the RUGGEDCOM RSG2200F interface.
For more information about configuring the device, refer to the "RUGGEDCOMROS
Configuration Manual" associated with the installed software release.
22
RUGGEDCOM RSG2200F
Installation Manual, 04/2022, C79000-G8976-1346-10