background image

Introduction

1.2 Description

6

2

1

4

3

5

7

5

8

9

     1    

POWER LED

     2    

ALARM LED

     3    

EoVDSL Port

     4    

Copper (10/100Base-TX) Ethernet Ports

     5    

Wireless Ethernet Ports

     6    

RS232 Console Port (Serial)

     7    

Failsafe Alarm Relay

     8    

Chassis Ground Connection

     9    

Power Supply Terminal Block

Figure 1.1

RUGGEDCOM RS930W

POWER LED

Illuminates green when power is supplied to the device.

ALARM LED

Illuminates red when an alarm condition exists.

Console Port

The serial console port is for interfacing directly with the device and

accessing initial management functions. For information about con-

necting to the device via the serial console port, refer to 

"Connect-

ing to the Device (Page 19)"

.

Communication Ports

Communication ports in general receive and transmit data, as well

as provide access to the RUGGEDCOM RUGGEDCOM RS930W Web

interface. For more information about the various ports available,

refer to 

"

Communication Ports

 (Page 21)"

.

Failsafe Alarm Relay

Latches to default state when a power disruption or other alarm

condition occurs. For more information, refer to:

"Connecting the Failsafe Alarm Relay (Page 12)"

"Failsafe Alarm Relay Specifications (Page 32)"

Power Supply Terminal Blocks

Pluggable terminal blocks for connecting one or more power

sources. For more information, refer to 

"Connecting Power (Page

13)"

 and 

"Power Supply Specifications (Page 31)"

.

RUGGEDCOM RS930W

Installation Manual, 02/2020, C79000-G8976-1035-07

3

Содержание SIMATIC NET RUGGEDCOM RS930W





















































Отзывы: