Siemens SIMATIC NET RUGGEDCOM i800, Руководство по установке

Страница: 12 / 38

Introduction
1.3 Required Tools and Materials
Failsafe Alarm Relay Latches to default state when a power disruption or other alarm
condition occurs. For more information, refer to:
•
"Connecting the Failsafe Alarm Relay (If Equipped) (Page
8)"
• "Failsafe Alarm Relay Specifications (Page 19)"
Power Supply Terminal Block A pluggable terminal block. For more information, refer to:
•
"Connecting Power (Page 9)"
• "Power Supply Specifications (Page 19)"
POWER LEDs Illuminate when power is being supplied to the device by the
respective power source.
Color Description
Green Device ready
Red Device booting up
Off No power
ALARM LED Illuminates when an alarm condition exists.
Communication Ports Receive and transmit data, as well as provide access to the
RUGGEDCOM i800 Web interface. For more information about
the various ports available for the RUGGEDCOM i800, refer to
" Communication Ports (Page 17)" .
Access Plate The removable access plate provides access to the microSD/
microSDHC slot. Use a microSD/microSDHC card to load/store the
firmware and configuration for the device. For information about
using a microSD/microSDHC card, refer to "Inserting/Removing the
MicroSD/MicroSDHC Card (Page 14)" .
RS-232 Console Port The serial console port is for interfacing directly with the device
and accessing initial management functions. For information
about connecting to the device via the serial console port, refer to
"Connecting to the Device (Page 13)" .
1.3 Required Tools and Materials
The following tools and materials are required to install the RUGGEDCOM i800:
Tools/Materials Purpose
AC or DC power cord (16 AWG) For connecting power to the device.
CAT-5 Ethernet cables For connecting the device to the network.
Flathead screwdriver For mounting the device to a DIN rail.
Phillips screwdriver For mounting the device to a panel.
4 x #8-32 screws For mounting the device to a panel.
1.4 Decommissioning and Disposal
Proper decommissioning and disposal of this device is important to prevent malicious
users from obtaining proprietary information and to protect the environment.
RUGGEDCOM i800
Installation Manual, 01/2021, C79000-G8976-1002-06
3