manualshive.com logo in svg

Siemens SIMATIC NET RUGGEDCOM i800, Руководство по установке, Страница: 24 / 38

Поделиться
Скачать
Siemens SIMATIC NET RUGGEDCOM i800 Скачать руководство пользователя страница 24

Device Management

3.3 Inserting/Removing the MicroSD/MicroSDHC Card

• Do not expose the microSD/microSDHC card to large magnetic or static electric

fields.

• Do not bend or drop the microSD/microSDHC card.

NOTICE

Security hazard – risk of unauthorized access and/or exploitation.

Make sure to remove the microSD/microSDHC card before decommissioning the

device or sending the device to a third-party.

To insert or remove a microSD/microSDHC card, do the following:
1. Power down the device.
2. Unscrew the retention screw and remove the access plate.

1

2

3

     1    

Retention Screw

     2    

Access Plate

     3    

MicroSD/MicroSDHC Card

Figure 3.2

Inserting/Removing a MicroSD/MicroSDHC Card

3. Without touching the contacts on the card, insert or remove the microSD/

microSDHC card.

4. Install the access plate and finger-tighten the retention screw.
5. Power up the device.

RUGGEDCOM i800

Installation Manual, 01/2021, C79000-G8976-1002-06

15

Содержание SIMATIC NET RUGGEDCOM i800







































Отзывы:

Нет отзывов