background image

Approvals 

ower supply PS598-1 for SCALANCE XR-500M 

26

A5E03275848A-01, 09/2011 

EU declaration of conformity 
You will find the EU declaration of conformity for these products on the Internet under 

the following entry IDs/Internet page specified here: 
ID = 50040269 (

http://support.automation.siemens.com/WW/view/en/50040269

)  

 

Entry list 

 

Entry type "Certificates" 

 

Type of certificate "Declaration of Conformity" 

Example German: "EG-Konformitätserklärung SCALANCE XR552-12M",  

Example English: "Declaration of Conformity SCALANCE XR552-12M". 

Mechanical stability (in operation) 

IEC 60068-2-6 vibration 

*) 

IEC 60068-2-27 shock 

IEC 60068-2-6 vibration 

Device: 

SCALANCE 

5 – 9 Hz: 3.5 mm 

9 – 150 Hz: 1 g 

1 octave/min, 

20 sweeps 

15 g, 11 ms duration 

6 shocks per axis 

10 – 58 Hz: 0.075 mm 

85 – 150 Hz: 1 g 

1 octave/min, 20 sweeps 

PS598-1 

● 

● 

● 

*) Note: When rack mounted with four securing points 

 

 

P

 

Trademarks 

All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks 

in this publication may be trademarks whose use by third parties for their own purposes could 

violate the rights of the owner. 

Disclaimer of Liability 

We have reviewed the contents of this publication to ensure consistency with the hardware and 

software described. Since variance cannot be precluded entirely, we cannot guarantee full 

consistency. However, the information in this publication is reviewed regularly and any 

necessary corrections are included in subsequent editions. 

Siemens AG 

Industry Sector 

Postfach 48 48 

90026 NÜRNBERG 

 

Power supply PS598-1 for SCALANCE XR-500M 

A5E03275848A-01, 09/2011 

Содержание SIMATIC NET PS598-1



























Отзывы: