manualshive.com logo in svg

Siemens SIMATIC NET PROFIBUS, Руководство пользователя, Страница: 292 / 490

Поделиться
Скачать
Siemens SIMATIC NET PROFIBUS Скачать руководство пользователя страница 292

SIMATIC NET PROFIBUS Plastic Fiber Optic

Installation Instructions for Simplex Connectors

Page 2

_________________________________________________________________________________

 

We have checked the contents of this manual for
agreement with the tools described. Since
deviations cannot be precluded entirely, we cannot
guarantee full agreement. However, the data in this
manual are reviewed regularly and any necessary
corrections included in subsequent editi-
ons.Suggestions for improvement are welcome.

 

 Technical data subject to change.

 

The reproduction, transmission or use of this document
or its contents is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of
a utility or design, are reserved.

 

 

Copyright © Siemens AG 1999

 

All Rights Reserved

 

 

Note

 

We would point out that the contents of this product documentation shall not become a part of or modify any prior or existing agree-
ment, commitment or legal relationship. The Purchase Agreement contains the complete and exclusive obligations of Siemens. Any
statements contained in this documentation do not create new warranties or restrict the existing warranty.

 

We would further point out that, for reasons of clarity, these operating instructions cannot deal with every possible problem arising
from the use of this device. Should you require further information or if any special problems arise which are not sufficiently dealt with
in the operating instructions, please contact your local Siemens representative.

 

WARNING !

 

The tools described in these instructions are intended only for stripping the jackets from SIMATIC
NET PROFIBUS Plastic Fiber Optic cables. Using the tools for any other purpose can lead to injury
or to damage of the tools or cable.

 

Under no circumstances must the tools be used on live cables.

 

Personnel qualification requirements

 

Qualified personnel as referred to in the operating instructions or in the warning notes are defined as persons who are
familiar with the installation, assembly, startup and operation of this product and who possess the relevant
qualifications for their work and have a First Aid qualification.

 

!

Содержание SIMATIC NET PROFIBUS











































































































































































































































































































































































































































































































Отзывы:

Нет отзывов