Siemens SIMATIC Mobile Client900WXN Скачать руководство пользователя страница 37

Страница: 37 / 94

Installing and connecting the device

3.3 Connecting the device

Mobile Client900WXN
Operating Instructions, 04/2015, A5E35883103-AB

3.3

Connecting the device

3.3.1

Connecting the connection box

3.3.1.1

Overview

NOTICE
Approved connecting cables
Only the following connecting cables may be connected to the Connection Box

compact CA:

•

6AV6645-7CY03-1WP0 (FS02), 5 m long

•

6AV6645-7CY04-1WP0 (FS02), 10 m long

•

6AV6645-7CY05-1WP0 (FS02), 15 m long

Note
Installation notes and instructions on use

•

The Connection Box compact CA is only suitable for installation in a control cabinet.

Please observe the relevant guidelines for control cabinet construction at the place of

use.

•

Make sure that all the connectors and cables have sufficient contact and strain relief.

•

The two LEDs at the RJ45 socket are not supported by the hardware and are not

illuminated during operation.

Requirement

●

The connection box is mounted in accordance with the specifications of these operating

instructions.

●

Only shielded standard cables may be used.

Note
Permitted length of the connecting cable
Do not exceed the permitted cable length. Otherwise, functional errors may occur.
Observe the maximum length for the connecting cable. This information concerns the

length of the cable between the connection box and the HMI device.

Содержание SIMATIC Mobile Client900WXN































































































Результаты поиска

Содержание SIMATIC Mobile Client900WXN

Отзывы:

Похожие инструкции для SIMATIC Mobile Client900WXN

Бренды по названию

Популярные бренды

Siemens SIMATIC Mobile Client900WXN, Руководство по эксплуатации

Результаты поиска

Содержание SIMATIC Mobile Client900WXN

Отзывы:

Похожие инструкции для SIMATIC Mobile Client900WXN

Бренды по названию

Популярные бренды