Siemens SIMATIC IPC847E Скачать руководство пользователя страница 72

Страница: 72 / 212

Operating the device

5.4 Operating RAID systems

SIMATIC IPC847E

Operating Instructions, 10/2018, A5E43920357-AA

Manual integration of the replaced drive (in the event of an error)

You can manually integrate a replaced drive in the onboard RAID system as follows:

●

In the running system (without restarting the device)

●

After switching off the device

Integrating a replaced drive in the running system (without restarting the device):
1.

Select "Start" > "Intel" > "Intel Rapid Storage Technology".

Select the "Status" menu.
The new drive is displayed on the right-hand side of the program window in the "Storage

System View" area.
If the new drive is not displayed, click the

icon "Run Hardware Scan now".

Click on the RAID volume in the "Storage System View" area on the right-hand side of the

program window.

In the "Manage" menu, click on the link "Rebuild to another Disk".

Select the newly integrated drive in the next dialog and click "Rebuild".
The RAID system data synchronization (Page 82) is started.

5.4.4.4

Integrating a hot-spare drive into the onboard RAID system

The RAID system is configured in the delivery state in such a way that a new hot-spare drive

is automatically integrated.
If the automatic integration of a drive in the RAID system is deactivated or if the hot-spare

drive was replaced for a RAID system, then you have to integrate the new drive manually.

Requirement

A new drive was used in the RAID system.

Procedure

Select "Start" > "Intel" > "Intel Rapid Storage Technology".

Click

"Run Hardware Scan now".

The new drive is found and displayed.

Select the new drive under "Storage system view" and select "Mark as Spare" under

"Manage disk".

Confirm the warning message in the "Mark as Spare" window with "Yes".

Содержание SIMATIC IPC847E





















































































































































































































Результаты поиска

Содержание SIMATIC IPC847E

Отзывы:

Похожие инструкции для SIMATIC IPC847E

Бренды по названию

Популярные бренды

Siemens SIMATIC IPC847E, Руководство по эксплуатации

Результаты поиска

Содержание SIMATIC IPC847E

Отзывы:

Похожие инструкции для SIMATIC IPC847E

Бренды по названию

Популярные бренды