Siemens SIMATIC IPC547D, Руководство по эксплуатации

Страница: 95 / 138

Technical specifications
8.4 Technical specifications
SIMATIC IPC547D
Operating Instructions, 06/2011, A5E03473780-01
95
8.4 Technical specifications
8.4.1 General technical specifications
NOTICE
Applicability of technical specifications
The following technical specifications only apply under the following conditions:
 The device is in good working order.

The fan cover and filter mat are installed.
 The device is closed.
Order numbers 6AG4104-2....-.... (for details, refer to the ordering
documentation)
Dimensions 433.5 × 176.5 × 445.5 (W × H × D in mm)
You will find detailed information on dimensions in the chapter
"Dimension drawing of the device (Page 93)".
Weight Min. 16 kg, max. 23 kg
Supply voltage (V
N
)
 100 V AC to 240 V AC (-15%, +10%)

Redundant power supply:
2 × 100 V AC to 240 V AC (-15%, +10%)
Input current AC

Continuous current up to 6 A (at 100 V) 3 A (at 240 V)
 During startup up to 30 A and 5 ms
Frequency 50 to 60 Hz
minimum 47 Hz to maximum 63 Hz, sinusoidal
Transient voltage interruption 20 ms at 93 V
max. 10 events per hour; recovery time of at least 1 s
Power consumption With 210 W secondary:
Redundant AC power supply: Max. 300 W at 70% efficiency
AC power supply: Max. 270 W at 80% efficiency
Power loss/heat emission 300 W = 300 J/s = 0.28 BTU/s
270 W = 270 J/s = 0.26 BTU/s
Current output (DC) +5 V/26 A, +3.3 V/24 A in total 190 W permitted
+12 V/15 A, +12 V/15 A, -12 V/0.2 A, +5 Vaux/2 A
The total sum of all voltages is max. 210 W.
Noise emission < 45 dB (A) to DIN 45635
(40 dB(A) at 20 °C, Windows idle mode)
Degree of protection

IP 30 with closed front cover

IP 20 on the rear according to EN 60529
Dust protection With the front panel closed in accordance with IEC 60529
Filter class G2 EN 779, 99 % of particles > 0.5 mm are filtered