Siemens SIMATIC IPC547D Скачать руководство пользователя страница 77

Страница: 77 / 138

Device maintenance and repair

7.2 Installing the software

SIMATIC IPC547D
Operating Instructions, 06/2011, A5E03473780-01

7.2

Installing the software

7.2.1

General installation procedure

If your software no longer functions correctly, you can reinstall it from either the

Recovery DVD, the "Documentation and Drivers" DVD or the Restore DVD.

Recovery DVD:
The recovery DVD contains the installation program with tools for configuring the hard drives

and installing the operating system and the languages supported by the operating system

(MUI package).
The basic language of the installed operating system is English. To add other languages,

install these languages from the Recovery DVD at a later time.

"Documentation and Drivers" DVD:
The "Documentation and Drivers" DVD contains the documentation and the hardware

drivers.

Restore DVD:
The Restore DVD is included in the scope of delivery when you have ordered a device with

operating system. The DVD contains a hard disk image file with the original software

package: Operating system with installed hardware drivers and monitoring software, e.g.

DiagBase.

7.2.2

Restoring the delivery state

You can restore the original factory software using the Restore DVD. The DVD contains the

necessary images and tools for transferring the factory software to the hard disk of your

device. Restoration of the entire hard disk with drive C: (system) and drive D: or only drive C:

is possible. This allows you to retain any user data on drive D:.

Содержание SIMATIC IPC547D











































































































































Результаты поиска

Содержание SIMATIC IPC547D

Отзывы:

Похожие инструкции для SIMATIC IPC547D

Бренды по названию

Популярные бренды

Siemens SIMATIC IPC547D, Руководство по эксплуатации

Результаты поиска

Содержание SIMATIC IPC547D

Отзывы:

Похожие инструкции для SIMATIC IPC547D

Бренды по названию

Популярные бренды