Siemens SIMATIC IPC547C, Начало работы

Страница: 26 / 36

Commissioning
6.2 Initial Commissioning - Initial Startup
SIMATIC IPC547C
26
Getting Started, 06/2009, A5E02411398-01
6.2 Initial Commissioning - Initial Startup
The operating system is set up automatically on the device when it is first started. Procede
as follows:
1.
Press the on/off button. The green power LED lights up. The PC performs a POST.
During the self-test, this message appears:
Press <F2> to enter SETUP
2. Wait until this message is cleared, then follow the instructions on the screen.
3. Type in the Product Key as required. You find this key on the "Certificate of
Authentication" in the "Product Key" line.
NOTICE
The PC may not be switched off at any time during the entire installation procedure.
Do not change the default BIOS settings, otherwise the operating system setup may
become corrupted.
4. Automatic restart
After you have entered all necessary information and after the operating systemsetup is
completed, the PC is automatically restarted and displays the user interface of the
relevant operating system.
From now on, after you switch on the PC, the user interface of the operating system is
automatically opened when the startup routine is completed.
Switching off the device
Note
When working with Windows, always switch off the PC by clicking Start > Shut Down.
Press the on/off button behind the front panel door. The green power LED is switched off.
Disconnect the mains connector to isolate the device from mains.