Siemens SIMATIC IPC427E Скачать руководство пользователя

Страница: 85 / 164

Device maintenance and repair

7.4 Installing the software

SIMATIC IPC427E
Operating Instructions, 09/2017, A5E37454814-AB

Follow the on-screen instructions.
After a few seconds, you will see the "Install Windows" installation program.

NOTICE
Data deleted
All data, user settings and existing authorizations or license keys are deleted during the

installation of Windows 7 and Windows 10.

•

Back up all data.

•

Check the data and time in the BIOS setup, "Main" menu and correct the displayed

time if necessary.

Now follow the instructions of the installation program "Install Windows". You will find

additional information in the operating system manual.

"Install Windows" installation program

The language of the installation program and the operating system you want to install has

been preset to English. You can change the language of the operating system after the

installation. You can find information on this in section: "Setting up the language selection by

means of the Multilanguage User Interface (MUI) (Page 85)".

Setting up partitions under Windows

You can set up partitions during the installation process.
The recommended minimum size for Windows system partition varies, depending on the

amount of RAM and additional software that you are going to use. Information about the

partitioning of the data volume in the delivery state is available in section Setting up the

partitions under Windows 7 Ultimate and Windows 10 (Page 90).

Setting up the language selection by means of the Multilanguage User Interface (MUI)

You can set the display of menus, dialogs or other information, such as date and time, to a

different language. For this purpose, you can either select one of the preinstalled languages

or install a new language package.
The following command sequences are described in English. Depending on the default

setting, they can be displayed in another language.

Содержание SIMATIC IPC427E





































































































































































Результаты поиска

Содержание SIMATIC IPC427E

Отзывы:

Похожие инструкции для SIMATIC IPC427E

Бренды по названию

Популярные бренды

Siemens SIMATIC IPC427E, Руководство по эксплуатации

Результаты поиска

Содержание SIMATIC IPC427E

Отзывы:

Похожие инструкции для SIMATIC IPC427E

Бренды по названию

Популярные бренды