Siemens SIMATIC IPC377E, Руководство по эксплуатации

Страница: 89 / 124

Technical specifications
8.6 BIOS description
SIMATIC IPC377E
Operating Instructions, 2017/05, A5E40965249-AA
89
Hardware Monitor
In hardware monitor page, you can view and monitor the hardware status. See the hardware
monitor parameters below:
Item Description
system temperature Show the temperature inside chassis.
CPU temperature Show the CPU temperature.
VCORE Show VCORE power voltage.
+3.3V Show +3.3V power voltage.
+5V Show +5V power voltage.
+12V Show +12V power voltage.
VCC3V Show VCC3V power voltage.
VSB3 Show VSB3 power voltage.
VBAT Show VBAT power voltage.
SIO Configuration
In Super IO configuration page, you can view and configure super IO chip parameters.
Serial port 1 configuration
Follow the instruction below to enable or disable the serial port 1.
1.
Select the port which you want to set with the arrow keys and press Enter key.
2. Select Enabled or Disabled as you need and press Enter key in the active window pop-
up.
3. The enabled port can select corresponding Change Setting and Device Mode and press
Enter key.
4. Press F4 key and save the change.
The table below is the detailed port setting.
Port type Change Settings
Device Mode
Serial port 1 Auto
IO=3F8h; IRQ=4;
IO=2F8h; IRQ=3;
RS-232
RS-422
RS-485
Serial port 2 Auto
IO=2F8h; IRQ=3;
IO=3F8h; IRQ=4;
RS-232
RS-422
RS-485
Serial port 3 Auto
IO=3E8h; IRQ=11;
IO=2E8h; IRQ=11;
-
Serial port 4 Auto
IO=2E8h; IRQ=11;
IO=3E8h; IRQ=11;
-