Siemens SIMATIC IOT2000 Series, Руководство по эксплуатации

Страница: 7 / 38

Introduction
2
2.1 Purpose of this documentation
These instructions contain all information required to commission and use the device. Read the
instructions carefully prior to installation and commissioning. In order to use the device
correctly, first review its principle of operation.
The instructions are aimed at persons mechanically installing the device, connecting it
electronically, configuring the parameters and commissioning it, as well as service and
maintenance engineers.
2.2 Document history
The most important changes in the documentation when compared with the respective
previous edition are given in the following table.
Manual edition Note
08/2021
Initial release
2.3 Designated use
Use the device in accordance with the information on the nameplate and in the Technical data
(Page 29).
2.4 Checking the scope of delivery
1. Check the packaging and the delivered articles for visible damage.
2. Report any claims for damages immediately to the shipping company.
3. Retain the damaged parts until clarification.
4. Check the consignment by comparing your order with the shipping documents for
correctness and completeness.
SIMATIC IOT2000 SG-Shield
Operating Instructions, 08/2021, A5E50985404-AA
7