Siemens SIMATIC CP 4163-1, Руководство по эксплуатации

Страница: 39 / 51

SIMATIC CP 4163-1
Operating Instructions, 12/2022, C79000-G8976-C588-01
39
Technical specifications
6
6.1 Technical specifications of the CP 4163-1
Note the information in the S7-4100 system manual /2/ (Page 49).
In addition to the information in the system manual, the following technical specifications
apply to the module.
Table 6- 1 Technical specifications of the CP 4163-1
Technical specifications
Article number 6DL4163-1EX00-0XE0
Attachment to Industrial Ethernet
Number 1
Design PN/IO interface with 2-port switch, 2 x RJ45 socket
Properties 100BASE-TX, IEEE 802.3-2005, Fast Ethernet, full duplex,
autocrossover, autonegotiation, galvanically isolated
Transmission speed 100 Mbps
Aging time (2-port switch) 5 minutes
Special features of the ports X1 P1
and X1 P2
Integration in ring topology / MRP possible
Electrical data
Power supply
via S7 backplane bus 15 V
Current consumption
From backplane bus Approx. 240 mA maximum
Active power loss 3.5 W
Insulation tested with DC 707 V (Type Test)
Permissible ambient conditions
Ambient temperature at -1000 ... 2000 m above sea level *
•
During operation with the rack
installed horizontally
(CP vertically)
• -25 °C ... +70 °C
• During storage • -40 °C ... +70 °C
• During transportation • -40 °C ... +70 °C
Relative humidity
•
During operation • ≤ 95% at 25 °C, no condensation
Contaminant concentration According to ISA-S71.04 severity level G1, G2, G3
Operating altitude Up to 5000 m above sea level *
Design, dimensions and weight
Module format Compact module S7-4100, single width
Degree of protection IP20