Siemens Simatic 6ES7 157-0AC80-0 A0 Series, Руководство пользователя

Страница: 96 / 182

Diagnostics Using the User Program
10-2
DP/PA Link and Y Link Bus Couplings
A5E00193841-011
10.1 Structure of the slave diagnosis
Influencing factors
The structure of the slave diagnosis depends on whether the IM 157 is in S7
standard operation, in redundant operation on an S7-400H or in DP standard
master operation.
Diagnostic blocks in S7 standard operation and in redundant operation
The table below shows the length of the diagnostic blocks and their start
addresses in the diagnostic frame.
Table 10-1 Length and start addresses of the diagnostic blocks in S7 standard operation and in
redundant operation
Diagnostic block Length in bytes Start address in
non-redundant
mode
Start address in
redundant mode
Standard diagnosis 6 0 0
Module diagnosis 31 6 6
Module status 63 37 37
Status message 60 100 100
H Status 8 – 160
Interrupt section (max. 63*) (160*) (168*)
Total length 160
(max. 223*)
168
(max. 231*)
*) Only if interrupts are reported
Diagnostic blocks in DP standard master operation
As of version 4, when the IM 157 is being configured via the device master file,
each diagnostic block (except for the standard diagnosis) can be selected to be
present or not. The sequence of the diagnostic blocks is fixed. The start address of
the individual diagnostic blocks in the diagnostic frame depends on which
diagnostic blocks have been selected.
The table below shows the length of the diagnostic blocks and examples of their
start addresses in the diagnostic frame for certain configurations.